Bukatun matsin lamba na mai da Shigarwa Bukatun saitin janareta na mai

● Bukatun matsin lamba na mai:

1. Matsin shiga na genset na LNG: 0.4Mpa-0.7Mpa

2. Matsin shiga na CNG gensett: 0.1Mpa-0.7Mpa

3. Matsi na shigar da genset na biogas: 3.5Kpa-10Kpa

4. Matsi na bututun iskar gas: 0.1Kpa-10Kpa

Lura: Matsi da ke sama shine babban fa'idar amfani, don Allah a yi amfani da matsin iskar gas da ya dace don Injin samar da iskar gas 1 mw bisa ga yarjejeniyar fasaha da ɓangarorin biyu suka sanya wa hannu.

● Mai sanyaya jiki:

Injin ya kamata ya ɗauki ruwa mai laushi a matsayin mai sanyaya, kuma ya kamata a ƙara maganin hana daskarewa lokacin da zafin jiki na yanayi ya ƙasa da 5℃.

Alaƙa tsakanin rabon sanyaya injin da zafin jiki na yanayi

Ƙarfin hana daskarewa na Injin samar da iskar gas 3 mw330L

Ruwan sanyaya ya kamata ya zama maganin daskarewa na dogon lokaci tare da tasirin hana tsatsa, hana kumburi da hana daskarewa.

Man injin l:

Dole ne a ƙara injin ɗin da man fetur na musamman na injin gas (CNG/LNG) kuma ya kamata a ƙayyade matsayin mai bisa ga kewayon zafin jiki na shekara-shekara a wurin kamar yadda aka ƙayyade a cikin tebur mai zuwa.

Kwatanta ma'aunin mai a yanayin zafi daban-daban na muhalli

Bambancin zafin jiki na kewayon

1. Canja matatar mai duk lokacin da ka canza mai

2. Kar a duba matakin man shafawa lokacin da injin ke aiki

3. Ba a yarda a haɗa nau'ikan mai daban-daban ba

4. Matsakaicin matsin lamba na mai yayin aiki na yau da kullun na na'urar: 100~600kpa (zafin mai ≥80℃)

5. Ya kamata a ajiye adadin mai a cikin ma'aunin da ya dace.

Bukatun Shigarwa:

●Bukatun tsarin shaye-shaye:

Idan injin yana buƙatar bututun shaye-shaye na waje, a ajiye bututun ba tare da wani cikas ba, sannan a yi ƙoƙarin guje wa bututun ya yi tsayi ko kuma ya juya ba zato ba tsammani. Idan bututun shaye-shaye ya haɗu da waje, ya kamata bakin bututun waje ya karkata ƙasa kaɗan don ruwan da ke cikin bututun ya iya fita.

● Bukatun Shigarwa:

Naúrar Saitin janareta na iskar gas ya kamata a daidaita shi a kan harsashin ginin, karkacewar tsayin daka yayin aiki bai wuce digiri 10 ba, kuma karkacewar gefe bai wuce digiri 5 ba.

● Bukatun tsarin da'ira:

Ingancin kebul na waje na iskar gas janareta 500kw ya kamata ya dace da ƙa'idodin ƙasa, kuma ya kamata a zaɓi ƙayyadaddun samfurin bisa ga ƙarfin na'urar, kuma a aiwatar da su bisa ga ƙa'idodin ƙasa don guje wa haɗurra.

Tuntuɓi:

Kamfanin Sichuan Hengzhong Automation Equipment Co., Ltd.

Waya/WhatsApp/Wechat: +86 177 8117 4421 +86 138 8076 0589

Yanar Gizo: www.rtgastreat.com Imel: info@rtgastreat.com

Adireshi: Lamba ta 8, Sashe na 2 na Titin Tengfei, Gundumar Shigao, Sabon Yankin Tianfu, birnin Meishan, Sichuan China 620564

.