1. Bayanin aikin

1.1. Kayan aiki Buƙata (ba a bayar ba tukuna)

1.2. Kayan aikin lantarki Sigogi (ba a bayar da su ba tukuna)

1.3. Yanayin aikin

1.3.1. Yanayin yanayi (ba a bayar da shi ba tukuna)

Shafin aikin:

Tsawon: m

Matsakaicin zafin jiki na shekara-shekara ℃,

Matsakaicin zafin jiki ℃,

Mafi ƙarancin zafin jiki ℃,

Bala'o'in ƙasa (guguwa mai yashi, ruwan sama mai guba, kwararar tarkace, ambaliya, da sauransu) ；

1.3.2. Haɗin iskar gas (ba a bayar da shi ba tukuna)

Tsarin iskar gas (ƙashi mai yawa):

Suna	Jakar girma	Bayani
Methane CH4
Ethane C2H6
Propane C3H8
Isobutane i-C4H10
N-butane n-C4H10
Isopentane i-C5H12
N-pentane n-C5H12
Nitrogen N₂
Hydrogen H₂
Carbon dioxide CO2₂
Sulfur dioxide H₂S
Ruwan iskar gas mai ƙarancin iskar gas H₂ABINCI
Oxygen O₂
Wani

2. Shawarar fasaha

Dangane da buƙatun kayan aiki daga abokan ciniki, kamfaninmu zai iya samar da saitin janareta mai ƙarfin 150KW. Na'urar tana amfani da injin Steyr T12 a matsayin tushen wutar lantarki don tuƙa alternator mai aiki tare - sanannen kamfanin Faransa Leroy Somer - don samar da wutar lantarki, sannan kuma tana sarrafawa da gano aikin na'urar gaba ɗaya ta hanyar tsarin sarrafawa na Denmark. Saitin janareta mai ƙarfin 150KW ya ƙunshi kabad mai sarrafawa, kabad mai naúrar da ɗakin watsa zafi. Yana ƙarƙashin yankuna kuma amintacce ne kuma abin dogaro. Kebul ɗin yana gefen kabad mai sarrafawa, wanda ya dace da fita. Murfin yana saman akwatin, nesa da gefen kabad mai sarrafawa, don tabbatar da amincin aiki.

Duba tebur na 2-1 don sigogin fasaha na saitin janareta mai ƙarfin 150KW.

Tebur 2-1: Sigogi na fasaha na saitin janareta mai ƙarfin 150KW

S/Nr	Sunan siga	Bayani dalla-dalla
1	Naúrar	Saitin janareta mai amfani da iskar gas 150KW
1.1	Samfurin naúrar	RTF150C-41N
1.2	Ƙarfin da aka ƙima	150kW
1.3	Matsayin halin yanzu	270.6A
1.4	Ƙarfin wutar lantarki mai ƙima	230/400V
1.5	Mita mai ƙima	50Hz
1.6	Yanayin farawa	Wutar lantarki ta DC 24V
1.7	Yanayin daidaita gudu	Tsarin saurin lantarki
1.8	Yanayin sarrafa mai	Konewar lebur, sarrafa madauki a rufe
1.9	Yanayin kunnawa	Wutar lantarki mai ƙarfi mai zaman kanta ta silinda ɗaya mai sarrafawa ta lantarki
1.10	Nau'in aikin naúrar	Maɓalli ɗaya ta atomatik farawa / tsayawa
1.11	Yawan amfani da mai	≤0.3 g/kW*h
1.12	Samar da ƙarfin aiki	3.0 kWh/Nm³ (ƙimar nazari)
1.13	Girman gaba ɗaya na na'urar	4000 × 1600 × 3400mm
1.14	Nauyin naúrar da aka ƙayyade	4200kg
2	Injin
2.1	Alamar kasuwanci	Babban Motar Nauyin Aiki Na Ƙasa ta China
2.2	Samfuri	T12
2.3	Matsar da naúrar guda ɗaya	11,596
2.4	Nau'in shiga	Turbocharging, tilasta sanyaya tsakanin juna, tsarin bawul 4
2.5	Gudun da aka ƙima	1500r/min
2.6	Yanayin sanyaya	Sanyaya ruwa da aka tilasta
2.7	Yanayin shafawa	Matsi, man shafawa mai feshi
2.8	OILT Zafin Injin-mai-zafin jiki	≤105 ℃
3	Janareta
3.1	Janareta	Leroy Somer
3.2	Samfuri	LSA 44.3 VL13
3.3	Ma'aunin ƙarfi	0.8 (lokaci)
3.4	Ingantaccen samarwa	Kashi 92.7%
3.5	Ƙarfin janareta	180kVA
3.6	Lambar mataki	Waya ta mataki uku ta huɗu
3.7	Ajin rufi	H
3.8	Matakin kariya	IP23
4	Tsarin sarrafa naúrar
4.1	Alamar kasuwanci	DEIF
4.2	Samfuri	Jerin AGC
4.3	Aikin Mai Kulawa	Maɓallin farko na aiki ɗaya, nunin bayanai, rikodi, sa ido kan kariya da sauran ayyuka;
4.4	Aikin nuni	Sauri / matsin lamba na mai / zafin ruwa / lokacin aiki / halin yanzu / ƙarfin lantarki / mita / ƙarfin lantarki na baturi / ƙarfin aiki, ƙarfin amsawa, rabon rarraba kaya, da sauransu;
4.5	Aikin kariya	Ayyukan sarrafawa ta atomatik da faɗakarwa kamar yawan zafin ruwa, ƙarancin matsin lamba na mai, saurin wuce gona da iri, yawan wutar lantarki, ƙarfin AC da DC, gajeriyar da'ira, da sauransu;
5	Akwati	Akwatin da aka ɗora a kan skid mai inganci, wanda aka haɗa shi da bututun iskar gas, bututun hayaki da sauran abubuwan da ke cikin tsarin;
1. Sigogi na fasaha a cikin wannan tsarin sun dogara ne akan iskar gas mai ƙarancin kalori na ka'ida na 35.8MJ/Nm³ wanda abokin ciniki ya bayar kuma ya cika sharuɗɗan ISO8528 / 1, iso3046 / 1 da bs5514 / 1. 2. Ana auna bayanan fasaha a ƙarƙashin yanayi na yau da kullun: matsin lamba na yanayi mai cikakken 100KPA, zafin jiki na yanayi 25 °C da kuma ɗanɗanon iska mai alaƙa da 30%. 3. Daidaita da ƙimar DIN ta ISO 3046/1 a ƙarƙashin yanayin muhalli. Juriyar amfani da mai mai ƙima shine ± 5%. 4. Gwajin ƙarfin naúrar 0.8 da sama.

Injin iskar gas na musamman: An yi amfani da injin jerin T12, wanda ke cikin injin mai sauri/inganci mai yawa. Fasahar konewa mai laushi da aka sarrafa ta hanyar lantarki na iya biyan buƙatun tattalin arzikin injin, wutar lantarki da fitar da hayaki. Yanayin sanyaya yana amfani da fanka mai rufewa da ruwa mai zagayawa. Tsarin sanyaya naúrar ba ya dogara da tsarin shigar iska a ɗakin injin. Ana sarrafa zafin jiki a ɗakin injin ta hanyar sarrafa haɗin gwiwa, kuma ana tace shigar iska a ɗakin injin ta hanyar matatar ƙura da aka gina a ciki.

Tsarin sarrafa injin iskar gas: An amince da tsarin sarrafa konewa mai rufewa da aka shigo da shi daga ECI na Amurka, wanda ya haɗa da tsarin kunna wuta mai zaman kansa ta silinda ɗaya, tsarin daidaita saurin lantarki, tsarin kula da rufewa da madauri na mai, tsarin daidaitawa na muhalli da tsarin bincike da kariya ta atomatik don tabbatar da ingantaccen iko na injin a ƙarƙashin duk yanayin aiki. Fitar da tsarin kula da injin mai na shekara-shekara shine raka'a 100,000, kuma aminci, kwanciyar hankali da amincin tsarin sun fi tabbata.

Janareta na musamman na ƙasa da ƙasa: An yi amfani da janareta mai aiki da wutar lantarki ta LSA 44.3 mai tsarin LSA 44.3 — daga Faransa Leroy Somer – mai sassa masu motsi masu ƙarfi, kuma an inganta juriyar tasirin kaya da aikin hana tsangwama na janareta don tabbatar da ingancin aikin kayan aiki na dogon lokaci.

Akwati mai aiki da yawa: Akwatin na'urar aiki mai ƙarfi da yawa, ikon sarrafa yanki mai hankali, inganta aminci da aikin kariya sosai, ta amfani da rufin polyurethane na gaba, mai haske da juriya ga lalacewa;

3. Gabatar da na'urar dalla-dalla

3.1 Yanayin farawa

Ana kunna na'urar ta hanyar amfani da wutar lantarki ta DC 24v, kuma wutar lantarki ta farko da wutar lantarki ta sarrafa na'urar sune fakitin batirin 24v. Mai samar da batirin zai samar da fakitin batirin a cikin cikakken saiti ba tare da tushen iska ko wutar lantarki na waje ba.

3.2 Tasha ta gaggawa

Na'urar tana da ayyukan dakatar da gaggawa ta hannu da kuma dakatar da gaggawa ta atomatik idan akwai haɗari.

3.3 Aikin naúrar

Na'urar na iya aiwatar da maɓalli ɗaya, daidaita rabon iska da mai ta atomatik, sarrafa wutar lantarki ta atomatik, lodawa da saukewa ta atomatik, da sauransu.

Tsarin sarrafa na'urar; Kabad ɗin sarrafa na'urar tsarin kabad ne na bene mai allon sarrafawa guda ɗaya. Kabad ɗin sarrafawa yana da na'urori masu sarrafawa, maɓallan kunnawa, kayan aikin nuni daban-daban, maɓallan daidaitawa, fitilun nunin kariya na na'urar, maɓallan tsayawa na gaggawa, da sauransu don sarrafawa da sa ido kan yanayin aikin na'urar janareta.

3.4 Kariyar laifin na'ura

Tsarin sarrafawa yana da cikakken kariya daga injin kamar overload, overcurrent, short da'ira, Undermita, over-mita, under-voltage, over-voltage da over-speed, kuma yana aika siginar faɗakarwa.

Idan injin ya lalace (kamar yawan zafin ruwan sanyaya, ƙarancin matsin mai, yawan aiki da yawa, gazawar farawa, da sauransu), za a aika da siginar faɗakarwa, kuma a yarda a kashe ta da hannu ko ta atomatik.

Idan injin ya sami manyan matsaloli (kamar zafin jiki mai yawa, ƙarancin matsin lamba na mai, yawan gudu, da sauransu), zai tsaya nan take ta atomatik ya kuma ba da ƙararrawa.

3.5 Yanayin amfani da kayan aiki

Zafin da ya dace na kayan aikin shine - 30 ℃ zuwa 40 ℃Idan zafin yanayi ya wuce digiri 40 ℃, za a rage ƙarfin injin daidai gwargwado. A ƙarƙashin yanayin samun iska mai kyau, ƙarfin injin zai ragu da kashi 3% ga kowane 5 ℃ ƙaruwar zafin yanayi; Tsayin wurin da ake amfani da kayan aikin bai kamata ya wuce mita 3000 ba. Idan tsayin ya kai mita 1000, ingancin janareta na na'urar shine mafi kyau. Ga kowace ƙaruwar tsayin mita 500, ƙarfin injin zai ragu da kashi 4%. Idan aka wuce iyakokin yanayin da ke sama, za a keɓance kayan aikin.

Lokacin Saƙo: Nuwamba-08-2021