Boemo bo Phahameng ba China Pigging Launcher le Factory ea ho amohela likolobe - Custom 50 to 100 MMSCFD 3 phase test and separqator - Rongteng

Boemo bo Phahameng ba China Pigging Launcher And Pig Receiver Factory - Custom 50 to 100 MMSCFD 3 phase test and separqator - Rongteng Featured Image

Tlhaloso e Khutšoanyane:

Re romelle lengolo-tsoibila WhatsApp Email

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

E Amanang le Video

Maikutlo (2)

tsoela pele ho matlafatsa, ho ba le boleng bo itseng ba ntho e lumellanang le litlhoko tsa maemo a mmaraka le tsa bareki. Feme ea rona e na le ts'ebetso e ntle ea netefatso e lokelang ho thehoa bakeng saSetsi sa Oli se Associated Gas Compressor,Setsi sa Ts'ebetso ea Khase ea Tlhaho,Thepa ea Ts'ebetso ea Skid-Mounted, Re lumela hore tšebeletso ea rona e mofuthu le ea setsebi e tla u tlisetsa limakatso tse monate hammoho le mahlohonolo.

Ea Phahameng ka ho Fetisisa ea China Pigging Launcher And Pig Receiver Factory - Custom 50 to 100 MMSCFD 3 phase test and separqator – Rongteng Detail:

Lisebelisoa tsa mantlha:
Sekhetho sa ho arola liteko, valve e laolang, khatello e fapaneng, boemo ba mokelikeli, mocheso, sesebelisoa sa ho lekanya, tsamaiso ea ho fumana le ho laola.

Sebopeho:
1. Likarolo tse tharo tsa separator skid, ntle le ts'ebetso e phahameng ea karohano ea oli, khase le metsi, e na le khatello ea moea ea mofuta oa motheo, taolo ea boemo ba mokelikeli le lera la pneumatic le laolang valve ho hlokomela taolo e felletseng ea khatello ea karohano ea liteko, boemo ba oli le sebopeho sa metsi a oli.

2. Adopt orifice metering device le lirekoto tse tharo ho metha phallo ea khase ea tlhaho. Lipoleiti tse tloaelehileng tsa orifice tse nang le li-apertures tse fapaneng li ka nkeloa sebaka tlas'a boemo ba ho se be le setopo sa tlhahiso ho latela phallo ea sebele setšeng, e nang le mosebetsi oa ho ikamahanya le litlhoko tsa tlhahlobo ea liliba tse fapaneng tsa oli le khase.

3. E le ho rarolla bothata ba ho se tsitse ha phetoho ea tlhahiso ea oli e tala nakong ea tlhahlobo, taolo ea potoloho e habeli le metering e ts'oanang e amoheloa ka metering le taolo, e leng, li-valve tse peli tsa pneumatic diaphragm tse laolang le tse peli tsa scraper kapa turbine flow meters bakeng sa taolo ea boemo ba oli ho finyella taolo e nepahetseng le metering.

4. Mohloli oa moea oa sesebelisoa bakeng sa sesebelisoa sa pneumatic o tsoa khase ea tlhaho e arohaneng le karohano, e omisitsoeng le e tlhotliloeng bakeng sa tšebeliso ea sesebelisoa sa pneumatic. Ka nako e ts'oanang, e boetse e na le sebopeho se ka ntle se hloekisitsoeng sa moea se hatelitsoeng, se ntlafatsang ho ikamahanya le maemo a sebaka sa karohano ea liteko.

5. Sekhetho sa ho arola liteko se na le li-valve tse peli tsa tšireletso le tsamaiso ea disc e phatlohang, e leng se tiisang hore ts'ebetso e bolokehile ka katleho.

Litlhaloso le liparamente tsa mokhahlelo o meraro oa separator skid
S/N	Paramethara	Mohlala
S/N	Paramethara	3ps-120 / 16	3ps-120 /15.6	3ps-240/16	3ps-240 / 16
1	Phalla (@ 0 ℃ 101.325kpa)	120×10⁴Nm³/d	120×10⁴Nm³/d	240×10⁴Nm³/d	240×10⁴Nm³/d
2	Khatello e mahareng	13.8MPa	13.8MPa	13.8MPa	13.8MPa
3	Khatello ea moralo	16MPa	15.6MPa	16MPa	15.6MPa
4	Mocheso o mahareng	60 ℃	100 ℃	60 ℃	100 ℃
5	Mocheso oa moralo	80 ℃	120 ℃	80 ℃	120 ℃
6	Tlhaloso ea karohano	DN1000×3500 δ=52	DN1000×3500 δ=52	DN1000×5000 δ=52	DN1000×5000 δ=52
7	Bophara ba phala ea metsi e kenang	DN125	DN150	DN200	DN200
8	Bophara ba phaephe ea khase ea khase	DN100	DN125	DN150	DN200
9	Hlakola bophara ba pipe ea metsi	DN65	DN65	DN100	DN100
10	Hlakola bophara ba pipe ea oli	DN50	DN50	DN80	DN80
11	Kakaretso ea boholo (mm)	6800×2400×3000	6800×24003000	9000×2800×3200	9800×2800×3400
12	Ho nepahala ha tekanyo	±5%	±5%	±5%	±5%
13	Ho nepahala ha karohano le katleho	10um/99.5%	10um/99.5%	10um/99.5%	10um/99.5%
14	Kereiti ea bopaki ba ho phatloha / boemo ba tšireletso ea lisebelisoa tsa motlakase tsa masimong	ExdⅡBT4/IP65	ExdⅡBT4/IP65	ExdⅡBT4/IP65	ExdⅡBT4/IP65
15	Moralo oa bophelo ba tšebeletso ea skid	15 lilemo	15 lilemo	15 lilemo	15 lilemo
16	Sebopeho sa kemiso ea lisebelisoa	Frame skid	Frame skid	Frame skid	Frame skid

Litšoantšo tsa lintlha tsa sehlahisoa:

Tataiso e Amanang ea Sehlahisoa:

E na le mokitlane o motle oa khoebo e nyane, litšebeletso tse ntle ka mor'a thekiso le lisebelisoa tsa morao-rao tsa tlhahiso, re fumane boemo bo ikhethang har'a bareki ba rona lefats'eng ka bophara bakeng sa High Quality China Pigging Launcher And Pig Receiver Factory - Custom 50 to 100 MMSCFD 3 phase test and separqator - Rongteng, Sehlahisoa se tla fana ka thepa ho lefats'e ka bophara, US le strive strive: le boqapi, bo ikemiselitse ho re etsa "tšepo ea bareki" le "khetho ea pele ea mochini oa lisebelisoa tsa mochini oa boenjineri" barekisi. Re khethe, ho arolelana boemo ba win-win!

Dosing le Sisteme ea Ente

Sesebelisoa sa Dosing

Thepa ea Khase ea Tlhaho Skid Mounted

PRMS ea Khase ea Tlhaho

Searohanyi sa Metsi a Oli

Sehlaseli sa Kolobe Le Moamoheli oa Kolobe

Ts'ebetso ea Khase ea Skid-Mounted

Mofuthu oa ho hlapa ka metsi

Mofuthu oa Bateng oa Metsi Bakeng sa Khase ea Tlhaho

Wellhead Desanding

Motho ea rekisoang ke setsebi ebile o na le boikarabelo, o mofuthu ebile o na le mekhoa e metle, re ne re e-na le puisano e monate 'me ha ho na lithibelo tsa puo mabapi le puisano.
Linaleli tse 5

Ka Charlotte oa Costa Rica - 2018.12.10 19:03

Thepa e sa tsoa amoheloa, re khotsofetse haholo, mofani oa thepa ea molemo haholo, re tšepa ho etsa boiteko bo tsitsitseng ba ho etsa betere.
Linaleli tse 5

Ka Lydia oa California - 2018.09.12 17:18