High Quality China Dehydration Equipment Exporters - TEG dehydration skid for natural gas purifying – Rongteng

Short Description:

Product Detail

Product Tags

Feedback (2)

We offer fantastic energy in high quality and enhancement,merchandising,profits and promoting and procedure for Fuel Gas Purifying, Oil Gas Water Three Phase Separator, Large LNG Liquefaction, We are sincere and open. We look forward to your visit and establishing trustworthy and long-term standing relationship.

High Quality China Dehydration Equipment Exporters - TEG dehydration skid for natural gas purifying – Rongteng Detail:

Description

TEG dehydration skid is a key device in natural gas purifying or natural gas treatment. TEG dehydration skid of feed gas is wet natural gas purification, and the unit capacity is 2.5~50×104 . The elasticity of operation is 50-100% and the annual production time is 8000 hours.

The TEG dehydration skid adopts about 99.74% (wt) triethylene glycol (TEG dehydrating agent, removing the most saturated water in wet natural gas purification, purification by TEG absorber after dehydration dry gas (in the factory water dew point pressure condition <-5 ℃) as a commodity to outside gas pipeline.

Flow chart

After water absorption, TEG is regenerated by the method of atmospheric pressure fire tube heating and regeneration. After heat exchange, the heat-depleted liquid is cooled and returned to the TEG absorption tower after pressurization for recycling.

The gas-forming components produced by the regeneration of the rich liquid are mainly water vapor and contain a small amount of hydrocarbons and gases.

In order to eliminate potential safety hazards and avoid direct emissions of environmental pollution, the recycled waste gas from the sulfur recovery device is discharged into the atmosphere after burning in the exhaust gas burning furnace.

Features

1. TEG dehydration process is simple, mature technology, compared with other dehydration method can obtain a larger dew point drop. Good thermal stability. It is easy to regenerate and has the advantages of small loss, low investment and operation cost.

2. A lean/rich liquid heat exchanger is installed before the lean liquid circulating pump, which not only improves the operating conditions of the circulating pump, but also increases the temperature of TEG rich liquid into the triethylene glycol regenerator, effectively recovering part of the heat and reducing the consumption of fuel gas for regeneration.

3. Set a filter on the rich liquid channel to remove the mechanical impurities and degradation products carried in the solution system, keep the solution clean and prevent the solution from foaming, which can reduce the loss of the solvent and is conducive to the long-term stable operation of the device.The direct fire tube heating method adopted in TEG regeneration is mature, reliable and easy to operate.

Technical parameters

Inlet gas condition
1	Flow	290X10⁴ Nm³/d
2	Inlet Pressure	4.86-6.15 MPa
3	Inlet Temperature	-48.98℃
Outlet gas condition
4	Flow	284.4X10⁴ Nm³/d
5	Outlet pressure	4.7-5.99 MPa
6	Outlet temperature	-50.29℃
7	H₂S	≤20g/m³
8	CO₂	≤3%
9	Water dew point	<-5℃

Product detail pictures:

Related Product Guide:

We always get the job done to be a tangible staff to ensure that we can easily offer you the best high-quality and the greatest value for High Quality China Dehydration Equipment Exporters - TEG dehydration skid for natural gas purifying – Rongteng, The product will supply to all over the world, such as: Turkey, Armenia, Czech republic, Our company's main items are widely used all over the world; 80% of our products and solutions exported to the United States, Japan, Europe and other markets. All stuff sincerely welcome guests come to visit our factory.

Fuel Gas Purifying Plant